Pack Size 
5L

Colour 
Red

Floors, Interior, Calcium sulphate / Anhydrite screeds

Calcium Sulphate / Anhydriter Screeds (inc heated) 
Prime the screed with one neat, undiluted coat of PrimeMorew CS. The primer must be allowed to dry before applying levelling and smoothing comppunds or commencing tiling. 

Coverage will vary dependent on the texture and porosity of the background. As a guide, 1 litre of PrimeMore CS will cover approximately 6.5m2 .

All laitance and surface contaminants must be completely removed. The screed must be confirmed adequately dry, no greater than *85% Relative Humidity (RH).

New heated screeds must be commissioned before commencing work. Underfloor heating must be switched off 48 hours prior to commencing work.

*When fitting resilient flooring, due to most adhesives and flooring being moisture sensitive, ensure the screed is no greater than 75% RH before fitting the floor covering

Shake the bottle well before use.

Apply one neat, undiluted coat of PrimeMore CS uniformly to the prepared background using a short pile roller ensuring that the surface of the screed has been entirely covered.

To avoid any potential inadvertent removal of the primer, PrimeMore CS must be completely dry before being walked upon, and before applying a levelling and smoothing compound or commencing tiling. Drying times will vary dependent on the site temperatures (air and background) and the porosity of the background. When applied at 20°C, PrimeMore CS will dry in approximately 60 minutes.

Application temperature
≥ 5˚C

At 20˚C approximately 60 minutes