GoPoxy 'No Mess' is the easy-to-use epoxy grout. It's simple 'peel-off' formula saves hours compared with alternative epoxy grouts.
Perfect for bathrooms, showers and any high-moisture areas as it cures to a solid, non-porous finish that helps resist water penetration, mold and mildew growth.
*Each tube includes 1 mixing nozzle*
GoPoxy Grout Oak 14
1. Preparation:
o Ensure tiles are fully set before applying
o Ensure tile joints are clean, dry, and free of debris or adhesive.
o Use priming wax or tape to protect tile edges, especially for porous or textured surfaces.
o Always test a small area to confirm compatibility and desired finish.
2. Mixing:
o Insert the GoPoxy tube into the grout gun and attach the nozzle securely.
o Discard the first 30-40 cm of grout to ensure proper mixing of the two components.
3. Application:
o Apply slowly to fill joints completely, avoiding air bubbles.
o It is mandatory to carry out a test on a small inconspicuous area to test suitability for your job, before applying to the whole job.
o Use GoPoxy finishing tools for a smooth, professional result.
4. Curing:
o Light foot traffic: 36 hours.
o Full curing: 48 hours, depending on temperature and conditions.
5. Storage:
o Store between 8-18°C in a cool, dry place, away from direct sunlight. Ensure the cap is replaced tightly after use.